BT17 v2 L/H

product
  • Full Outdoor radio for 17 GHz free band
  • Up to 551 Mbps throughput
  • 80 MHz bandwidth
  • Low / High radio unit
  • Radio output power up to +10 dBm
  • 4 x GbitEth Interface (2 x port RJ45, 2 x SFP slot)
  • Separate management port
  • Built-in Spectrum Analyzer
  • SNMP management, SNMP MIB file
  • 2 x Power Over Ethernet  IEEE 802.3at
  • Power supply 20-57 VDC
  • Power consumption up to 35 W
  • Operational temperature -30 °C to +50 °C

Description

BT17 v2 L/H is a Full-Duplex microwave link operating in the 17 GHz  license-free band. The radio can provide up to 551 Mbps throughput using 256 QAM modulation and 80 MHz bandwidth. Radio also includes an advanced Ethernet settings.

It is designed as Low and High Full Outdoor Unit with direct mounting to a parabolic antenna. Link uses cross-polarization connection, therefore one side of the link must be installed in vertical polarization and the other side in the horizontal polarization.

These properties give service providers great flexibility and speed in building up their networks. Top-quality components and durable cast-aluminium design allows radio link used in very difficult climatic conditions.

 

FEATURES
 

  • Software Defined Radio SUMMIT DEVELOPMENT
  • Transmission capacity up to 551 Mbps full duplex
  • One universal unit (for both sides of link)
  • Cross-polarization connection of radio
  • 4 x Gigabit Ethernet port (2 x SFP, 2 x RJ45)
  • Jumbo packet transfer of MTU size up to 11 000 bytes
  • Security and Access management, digitally encrypted transmitter
  • Advanced QoS Port-based and Bandwidth control Management
  • Optimal solution for Triple Play services with IPTV support
  • Support IEEE 802.1Q VLAN (also QinQ)
  • Support packet-flow control acc. to IEEE 802.3x
  • Power supply via Ethernet cable acc. to IEEE 802.3at
  • Power supply via separate cable (DC input  20 to 57V)
  • Automatic switching to backup power supply (PoE1, PoE2, PWR)
  • Built-in spectral analyzer for searching for free channel
  • Easy aligning with the beeper, built-in RSSI indicator or measuring the DC voltage
  • Configuration of radio link in Windows, Linux, Android, iOS
  • Monitoring of radio parameters by means of IP protocol, with implemented SNMPv2
  • Monitoring of device parameters in real time (input voltage, current, power …)
  • Automatic detection of radio polarization
  • Direct installation of parabolic antenna

Specification

General RF

  
Frequency band 17,1 - 17,3 GHz
Bandwidth 3,5 to 80 MHz
Asymetric Bandwidth YES
ACM YES
FEC Reed-Solomon, Interleaving
Frequency stability ± 5 ppm
   

Transmitter

  
Output RF power -25 to +10 dBm (± 1 dB)*
APC (Autom. Power Control) YES
APCmin, APCmax YES
Regulation APC by RSSI YES

*     +8 dBm for modulation 256Q

 

Transmission symmetric capacity (80 / 80 MHz)
Bandwidth [Mbps] Modulation Capacity of radio [Mbps] Sensitivity for BER 10-6 [dBm] Sensitivity for BER 10-9 [dBm]
80 / 80 256 QAM 551 -61 -59
80 / 80 128 QAM 481 -65 -63
80 / 80 64 QAM 413 -68 -66
80 / 80 32 QAM 343 -72 -70
80 / 80 16 QAM 275 -75 -73
80 / 80 4 QAM 137 -79 -77

 

User interfaces

  
Eth1, Eth2 2 x 10/100/1000 Base-T
SFP1, SFP2 2 x 1000Base-SX / 1000Base-LX
GUI SMS (Windows, Linux-Wine)
WUI SMS (Web browser), read-only
MUI SMS (Android, iOS)

 

Power Supply & Cable

  
Power Over Ethernet IEEE 802.3at (PoE+)
Separate DC Power supply 20-57 VDC
Consumption up to 30 W
Cable Outdoor FTP CAT5e max. 100 m

 

Environmental
Provozní rozsah teplot -20°C až 50°C
Stupeň krytí IP-67

 

Mechanical
Mechanical concept Full Outdoor
Dimension 145 mm x 240 mm x 240 mm
Weight 3,5 kg

 

Compliance
IEEE 802.3 1000 Base-TX, 1000 Base-T
IEEE 802.3az Energy Efficient Ethernet
IEEE 802.3x Flow Control
IEEE 802.1q VLAN tagging, QinQ
IEEE 802.3u Auto-Negotiation protocol
IEEE 802.3at Power Over Ethernet plus

 

Antennas
Name Diameter [cm] Gain [dBi]
ANT17D35-C3 35 33
ANT17D65-C3 65 38
ANT17A90-C3 90 40
ANT17A120-C3 120 42

 

Accessories

Antennas

  • Parabolic antenna 17 GHz

     

     

     

    ANT 17D35-C3:

    • 17,1 - 17,3 GHz

    • Diameter 35 cm

    • Gain 33 dBi

    • Weight 7,8 kg

    • Operational temp. -40 °C to 55 °C

    • ETSI EN 302 217 Class3
     

     

     

    		  
     

    ANT 17D65-C3:

    • 17,1 - 17,3 GHz

    • Diameter 65 cm

    • Gain 38 dBi

    • Weight 11,5 kg

    • Operational temp. -40 °C to 55 °C

    • ETSI EN 302 217 Class3
     

     

     

    		  
     

    ANT 17A90-C3:

    • 17,1 - 17,3 GHz

    • Diameter 90 cm

    • Gain 40 dBi

    • Weight 19 kg

    • Operational temp. -40 °C to 55 °C

    • ETSI EN 302 217 Class3
     

     

     

    		  
     

    ANT 17A120-C3:

    • 17,1 - 17,3 GHz

    • Diameter 114 cm

    • Gain 42 dBi

    • Weight 28 kg

    • Operational temp. -40 °C to 55 °C

    • ETSI EN 302 217 Class3

     

     

Connectors

  • Connectors for BT links

    The following is the list of connectors and seals supplied to the BT links.

    • 1 x cable gland, 2 x rubber seal (SET1)

    • 4 x stopper - MK0143/1

    • 1 x DC power connector - E838A15EDGK352P


    Another number of connectors and seals must be specified in your order!
     

     

     

     

     

     

     

    SET1 (for Eth1, Eth2, PWR)

     

     

     

     

     

    SET2 (for SFP1, SFP2)

     

     

     

     

    Stopper (for Eth1, Eth2, SFP1, SFP2, PWR)

     

     

     

     

Power Supplies

  • Power Supplies to BT links

    BT link can be powered by a separte power cable in the range 20-57V DC or by Ethernet cable (according to Power Over Ethernet IEEE 802.3at).

    PoE injekctors availaible in our store:

     


    PowerDsine 90001G-40

    • Gigabit PoE AC adaptér
    • IEEE 802.3at
    • AC input 100-240 V
    • 40 W
    •  -10°C až 45°C
    • datasheet

     
         
     

    Phihong POE36D-1AT

    • Gigabit PoE DC adaptér
    • IEEE 802.3AT
    • DC input 36-72V
    • 33,6 W
    •  -20°C až 50°C
    • datasheet
       

     

     

     

To download

Software

  • trasa_5.2_db3.1.zip
    RF PATH
    5.2 (ver. DB 4.0)
    Radio Planning Tool software to assist the design of microwave radio links. Radio link calculator compute the Fade Margin, Received Signal Strength, Radio Distance and more.

SNMP